Product Description
DR 6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2×2 5G high power Radio module and 2×2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Passive POE 24-48V supported, DC jack 24-48V. If you need 802.3af/bt active POE support , then please order 524wifi 6018-S HV version.
Compact “DR6018-S” router board that runs Linux on a Qualcomm IPQ6010 with 802.11ax (Wi-Fi 6) and an M.2 slot plus dual GbE ports, including one with active or passive PoE, and optional micro-SD, GPS, and USB 3.0.
This board has followed up on its 5-port DR6018-S v3 router board with a smaller 524wifi 6018-S board with the same Qualcomm-Atheros IPQ6010 SoC with 802.11a/n/ac/ax (Wi-Fi 6), but with only 2x GbE ports. The 125 x 105 x 20mm 524wifi 6018-S features 802.3bt-compliant, active and passive, 24-48V Power-over-Ethernet on one of the ports. By comparison, the 524wifi 6018-S v3 offers a single passive PoE port along with 3x standard GbE and a 2.5GbE port.
The up to 1.8GHz, quad-core, Cortex-A53 IPQ6010, which has also appeared on 8devices’ Mango module and DVK, features built-in support for dual-band MU-MIMO, 2.4GHz/5GHz 802.11ax. Wi-Fi 6 is faster than 802.11ac (Wi-Fi 5) and supports concurrency for simultaneous WiFi connections to multiple devices. Wally’s does not list the OS, but has previously informed us its Qualcomm boards run Linux.
Although not listed in the specs, the detail view suggests you can optionally choose to remove the 2.4GHz radio and use only the 5GHz connection. In addition to the built-in 802.11ax, there is an M.2 E-key slot for adding a Qualcomm QCN9074 802.11ax module. Four x U.FL antenna connectors are included along with a Bluetooth 4.2 radio and optional GPS.
The 524wifi 6018-S ships with 256MB to 1GB DDR3L RAM via dual sockets plus 8MB NOR and 256MB NAND flash. A micro-SD and USB 3.0 port are optional. An FFC/FPC connector provides an LCD display output and there is a 12-pin serial interface.
In addition to the PoE port, a DC jack operates at the same 24-48V range. The board has a -40 to 70°C operating range with 5-95% non-condensing humidity resistance. The 524wifi 6018-S supports an EasyMeshHotel Wireless application.
DR6018-S:
DR6018-S V02 IPQ6010/IPQ6018/IPQ6000
Quad-core ARM 64bit A53 @1.8GHz Processor
1GB DDRL3L System Memory
8MB NOR Flash, 256MB NAND Flash
Supports Dynamic Frequency Selection (DFS)
2x2 On-board 2.4GHz radio, up to 573Mbps physical Data Rate
2x2 On-board 5GHz radio, up to 1201Mbps physical Data Rate
Hardware Specifications
Symbol
Parameter
CPU
Qualcomm-Atheros IPQ6010
CPU Frequency
Quad-core ARM 64 bit A53 @1.8 GHz processor
System Memory
1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design
Ethernet Port
1 x 1Gbps Ethernet Ports & POE 1x 1Gbps Ethernet Ports
NGFF Slot
M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0(For WiFi Module)
SD Card Slot
1x SD Card Slot(Option)
USB /header
1x USB 3.0 Port(Option)
POE
24V~48V passive POE/Active POE(Suport 802.3bt)
DC Jack
24V~48V power supply
LED header
2.0 pitch pin header
Serial Port
1x Serial Port 4 Pin Connector
Wireless
On-board 2x2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax, max 23dBm per chain
On-board 2x2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax, max 20dBm per chain
4 x MMCX Connectors
Nor Flash
8MB
Nand Flash
256MB
DDR
256MB~512MB
Dimension
125mm x 105mm x 20mm
Radio TX Specifications(5180MHz-5825MHz)
Operating Mode
Data Rate
Power
Tolerance
1 Chain
2 Chains
5Ghz 802.11ax HE20
MCS0
20dBm
23dbm
±2dB
MCS1
20dBm
23dBm
±2dB
MCS2
20dBm
23dBm
±2dB
MCS3
20dBm
23dBm
±2dB
MCS4
19dBm
22dBm
±2dB
MCS5
18dBm
21dBm
±2dB
MCS6
17dBm
20dBm
±2dB
MCS7
16dBm
19dBm
±2dB
MCS8
15dBm
18dBm
±2dB
MCS9
14dBm
17dBm
±2dB
MCS10
13dBm
16dBm
±2dB
MCS11
13dBm
16dbm
±2dB
5Ghz 802.11ax HE400
MCS0
20dBm
23dbm
±2dB
MCS1
20dBm
23dBm
±2dB
MCS2
20dBm
23dBm
±2dB
MCS3
20dBm
23dBm
±2dB
MCS4
19dBm
22dBm
±2dB
MCS5
18dBm
21dBm
±2dB
MCS6
17dBm
20dBm
±2dB
MCS7
16dBm
19dBm
±2dB
MCS8
15dBm
18dBm
±2dB
MCS9
14dBm
17dBm
±2dB
MCS10
13dBm
16dBm
±2dB
MCS11
13dBm
16dbm
±2dB
5Ghz 802.11ax HE80
MCS0
20dBm
23dbm
±2dB
MCS1
20dBm
23dBm
±2dB
MCS2
20dBm
23dBm
±2dB
MCS3
20dBm
23dBm
±2dB
MCS4
19dBm
22dBm
±2dB
MCS5
18dBm
21dBm
±2dB
MCS6
17dBm
20dBm
±2dB
MCS7
16dBm
19dBm
±2dB
MCS8
15dBm
18dBm
±2dB
MCS9
14dBm
17dBm
±2dB
MCS10
13dBm
16dBm
±2dB
MCS11
13dBm
16dbm
±2dB
Wallys Communications (SuZhou) Co., Ltd., http://www.wallystech.com,which is a professional supplier specializing in product design, manufacturing and offering superior OEM/ODM/JDM services in wireless communications. As a specialized manufacturer and exporter for these products in China,We sincerely hope to establish business relations with your esteemed corporation.
BY:Wallys Communications (Suzhou ) Co., LTD
EMAIL:sales3@wallystech.com
暂无评论