凡亿专栏 | QSDK/ipq5018/2T2R/Bluetooth BT5.1 supporting QCN9074/industrial wifi6 module
QSDK/ipq5018/2T2R/Bluetooth BT5.1 supporting QCN9074/industrial wifi6 module

QSDK/ipq5018/2T2R/Bluetooth BT5.1 supporting QCN9074/industrial wifi6 module

 

Qualcomm ipq5018 and ipq6000 chip comparison:

Qualcomm IPQ6000 is a quad core 1.2G processor, while Qualcomm IPQ5018 uses a 64 bit 1G dual core A53 architecture CPU+single core NPU.

Both are router processors. The IPQ5000 is weaker than the IPQ6000 of the AX5. The CPU integrates 256M memory. The 5G chip is QCN6102, which is stronger than the AX5. The 5G supports 160Mhz. The AX5 only supports up to 80MHz.

Only one channel of 160MHz can be used in China, and the interference of surrounding weather radars should also be checked. If interference is found, the router should actively avoid it and reduce it to 80Mhz. In addition, because the transmission distance of 160Mhz is shorter and the terminal support is not much, the actual use is subject to large restrictions. At present, most terminals only support 80Mhz, that is, in the case of 5G, the speed can only reach 1200Mbps.

 

DR5018

 

IPQ5018, 802.11ax,wifi 6e,QCN9074,

2X2 2.4G support 2x WiFi 6E Card support BT5.1

 

https://www.wallystech.com/Routerboard/DR5018-wifi6-Qualcomm-IPQ5018-2T2R-2.5G-ETH-port-802.11AX-MU-MIMO-OFDMA-supporting-QCN9074-wifi-card.html

 

Dual-core ARM 64bit A53@1.0GHz Processor

 

512MB DDRL3L System Memory

 

4MB NOR Flash, 128MB NAND Flash

 

2x2 On-board 2.4GHz radio,up to 573Mbps physical Data Rate

 

Support BT5.1

 

M.2 Card Slot for 5G (QUECTEL RM 500Q-GL) ;

 

M.2 Card Slot for QCN9074 WIFI 6E Card

 

Hardware Specifications

 

Symbol

Parameter

CPU

Qualcomm-Atheros IPQ5018

CPU Frequency

Dual-core ARM 64 bit A53 @1.0 GHz processor

System Memory

512MB DDR3L 16-bit interface with 32-bit memory bus design

Ethernet Port

4 x 1Gbps Ethernet Ports  or 1 x 1Gbps Ethernet Port & Poe

NGFF Slot

M.2 Card Slot for 5G (QUECTEL RM 500Q-GL) ;M.2 Card Slot for QCN9074 WIFI 6E Card

EMMC

4G/8G(optional)

USB /header

1x USB 3.0 Port

POE

NA

DC Jack

12V power supply

LED header

LED for power ,Wifi strength

Serial Port

support

Wireless

On-board 2x22.4GHz MU-MIMO OFDMA 802.11b/802.11g/802.11n/802.11ax,max 23dBm per chain

2x IPEX Connectors

Bluetooth

BT5.1

Nor Flash

8MB

Nand Flash

128 MB

DDR

512MB

Dimension 

170mm x 120mm x 15mm

 

This is Tina from Wallys, we are a Mfg of networking devices like cellular routers, NICs, CPE/AP, antennas etc

Our current products portfolio are based on Qualcomm and Mediatek platforms

Hardware customization and software integration is our speciality, OEM/ODM turnkey solution, aslo, we can work with you under JDM mode to develop new products together

By sending this text, i am seeking an potential business opportunity with you

If you are interested or looking for any networking hardwares, feel free to share me your detailed requirements, i can do a proposal accordingly

Thanks for your prompt attention and looking forward to your favorable feedback

Sincerely,,,

 

BY:Wallys Communications (Suzhou ) Co., LTD

EMAIL:sales3@wallystech.com

DR5018(1).jpg

声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表凡亿课堂立场。文章及其配图仅供工程师学习之用,如有内容图片侵权或者其他问题,请联系本站作侵删。
相关阅读
进入分区查看更多精彩内容>
精彩评论

暂无评论