This PDF is about how we make our Wallys DR9074 4x4 Wlan module work on X86 device
#Hardware we used
Linux PC x1 （Ubuntu 22.04）
DR9074-5G wlan module x1
DR3G11 adapter card x1

#ath11k firmware

Subject: Part No :
Doc REV: 0 1

Project Code: No :
Effective Date: Page 1 OF 3
Project Name:

Enter the wpa_supplicant directory and run the wpa.conf script under this directory Config the DR9074(wlp4s0) an ip address 192.168.2.15
Then ping 192.168.2.1
It is connected and can ping through

More detailed procedures are not mentioned here,as this is confidential, if you need technical support, please reach out to us via sale2@wallystech.com and we can disscuss our cooperation and commerce further.

Features

■ Qualcomm Atheros QCN9074/QCN9024

■ 6GHz, max 23dBm per chain, up to 4949Mbps

■ Single Band 6GHz 4x4 WiFi 6E (802.11ax)

■ 4 spatial streams (4SS)

■ M.2 E Key Interface

■ PCI Express 3.0 Interface