DR8072 V01 is a networking SBC based on Qualcomm IPQ8072A communication processor, with two 10GbE interfaces, one through an SFP cage and the other through an RJ45 connector, plus four Gigabit Ethernet ports, and 4×4 MIMO WiFi 6 connectivity .

Network SBC based on Qualcomm IPQ8072A communication processor with two 10GbE interfaces. One of these interfaces is implemented through an SFP rack and the other is based on an RJ45 connector. In addition, the SBC has four gigabit Ethernet ports that provide WiFi 6 connectivity (AX3700) at 4x4 MIMO.

SoC -- Qualcomm Atheros IPQ8072A quad-core Arm Cortex-A53@ 2.2GHz Qualcomm Networking Pro 1200 Platform

System Memory - 512MB DDR4 2400 MHZ 16-bit interface (up to 2GB RAM is optional)

Storage -- 8MB NOR flash, 256MB NAND flash

network

wireless

Onboard 4×4 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax with a maximum of 17dBm per chain and up to 1147Mbps

Onboard 4×4 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax with a maximum of 17dBm per chain and up to 2475Mbps

Frequency -- 2.412 to 2.472 GHz and 5.150 to 5.825 GHz

Modulation technology OFDMA, BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

8x U.L antenna connector

The cable

1x 10Gbps Ethernet RJ45 port

1x 10Gbps SFP rack

4x Gigabit Ethernet RJ45 port

USB - Two USB 3.0 ports

Expansion - 1x MiniPCIe slot and PCIe 3.0

Debugging - 20 pin JTAG connector, 4 pin serial connector

Others -- 1x software reset button, 2x RGB LED

Power supply - Provides 12V power through a DC jack

The temperature ranges from -20oC to 70oC. Storage: -40oC to 90oC

Support WiFi 6E Card,802.11ax,QCN9074

IPQ8072 4x4 2.4G & 5G 802.11ax

Features

■ Qualcomm Atheros IPQ8072A AR Quad Core CPU

■ On-board 5GHz radio, up to 2475 Mbps physical data rate,On-board 2.4GHz radio, up to 1147Mbps physical data rate

■ 8 MB NOR Flash, 256MB NAND Flash（NAND Flash can be up to 1GB as optional）

■ Support 11ax TX Beamforming,Support 11ac/ax MU-MIMO DL and UL,Support OFDMA DL and UL

■ Supports Dynamic Frequency Selection (DFS)

■ DDR 1GB DDR3L(Support DDR3L can be up to 2GB as optional)

■ M.2 connector can support QCN9074 production

DR9074-6E(PN02.7)

QCN9074 802.11ax 4x4 MU-MIMO 6GHz wifi6E

QCN9074 supports 4x4MIMO, and the maximum speed can reach 4804Mbps in theory when the bandwidth is set to 160MHz. If you use 2x2MMO, you can support 4096-QAM with a theoretical maximum rate of 2882Mbps.

QCN9074 11ax 4x4 6G M.2

Features

■ Qualcomm Atheros QCN9074

■ 6GHz, max 23dBm per chain, up to 4949Mbps

■ Single Band 6GHz 4x4 WiFi 6E (802.11ax)

■ 4 spatial streams (4SS)

■ M.2 E Key Interface

■ PCI Express 3.0 Interface

APPLICATIONS

Profi WiFi hotspot coverage

Commercial radio coverage

Hotel Wireless application

Country coverage

Internet for passengers (bus, train, plane, …)

Security Surveillance

Some special scene application

Heavy-duty industrial environment use

Stable networks guarantee for the ongoing continuity of your video surveillance. Our boards could establish a stable connected wireless environment which is critical for a security surveillance system.

Wallys has been specializing in product design & manufacturing and delivering superior OEM/ODM services in wireless communications. Dedicated to innovative designs for wireless modules. Customization is also supported, We have 90% of the world market, We're a supplier to Facebook.

We'll start with a quick review of how Wi-Fi has changed over the years.

In fact, the earliest generation of 802.11 standard can be traced back to 1997, when the wireless speed is very low, only 2Mbps, it is an original standard of the first generation .

With the introduction of 802.11b in 1999, the physical layer speed was increased to 11Mbps and there were very few commercial applications. At that time, Wi-Fi was still far away from people's lives

In 2003, the third generation of the standard, 802.11a/ g. Laptop began to configure wireless network card and home wireless router appeared in large quantity . Wi-fi comes into ordinary family.

Wallys are able to provide customizable solutions based on your your Spec requirements for applications, feel free to let me know if any question.

Email:sales2@wallystech.com